Ionad Meaisínithe Gantry Cúig-Ais Sraith PM-U
Gnéithe
Is ionad meaisínithe droichid cúig-ais bhíoma seasta féinfhorbartha é an tsraith táirgí seo le struchtúr dlúth, feidhmíocht den scoth, ardluais, cruinneas ard, déine ard, etc. Tá sé oiriúnach do chodanna meaisínithe i réimse tionscal ar nós aeraspáis, innealra innealtóireachta, iompar iarnróid, múnlaí beachtais, cumhacht gaoithe, etc.
Sraith PM-U
Glacann sé ceann luasctha dúbailte aerchóirithe ardluais agus ardchruinnis agus tá fearsaid leictreach ardchumhachta agus ard-chasmhóiminte feistithe ann, a bhfuil cumas gearrtha láidir aige.
Ceann luascáin dúbailte aerchóirithe
Glacann meaisín muilleoireachta CNC de chineál gantry le cinn luasctha dúbailte ardchruinneas, ard-dinimiciúla allmhairithe agus tá fearsaid leictreach ardluais, ard-chasmhóiminte feistithe air, a chomhlíonann na ceanglais arda maidir le cruinneas comhpháirteanna, cáilíocht dromchla agus éifeachtúlacht próiseála.
Dearadh optamaithe struchtúr ard-righneas
Úsáidtear modhanna deartha eilimintí críochta chun anailísí statach agus modúlach a dhéanamh ar chodanna éagsúla den ionad meaisínithe gantry CNC chun struchtúr an táirge a bharrfheabhsú tuilleadh agus dearadh struchtúrach ard-docht agus éadrom a bhaint amach.
Struchtúr tacaíochta cúnta scriú
An fad-taistealTá tacaíocht snámhach feistithe ar an scriú luaidhe, rud a fhéadfaidh luas teorann an scriú luaidhe agus cobhsaíocht rothlaithe ardluais a fheabhsú go héifeachtach.
Iris uirlisí
Tá cineálacha éagsúla irisí uirlisí, 24/32/40/60, ar fáil chun uaireanta meaisínithe cúnta a ghiorrú go héifeachtach.
Tacaíocht ard-righneas
AnmeaisínTá trí threoir mhóra feistithe ar an leaba, a sholáthraíonn dolúbthacht leordhóthanach tacaíochta agus coinneáil beachtais.
Dearadh sábháilteachta daonnaithe
Dearadh laibirt miotail leatháin ag bun antábla oibrecosc a chur ar sceallóga iarainn dul isteach sa mheaisín muilleoireachta gantry CNC leaba. Cuireann an umar bainte sceallóga comhtháite deireadh go bunúsach leis an bhfadhb a bhaineann le sceitheadh uisce.
Sonraíochtaí Teicniúla
| Mír | Aonad | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Raon próiseála |
|
|
|
|
|
| Taisteal ais X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| Raon rothlaithe ais A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Leithead éifeachtach gantry | mm | 2800 | 2800 | 2800 | 3300 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Tábla oibre |
|
|
|
|
|
| Toisí an tábla oibre | mm | 2000×3000 | 2000×4000 | 2000×6000 | 2500×4000 |
| Cumas ualaigh oibre | t | 16 | 20 | 26 | 22 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána |
|
|
|
|
|
| Uasluas beathaithe X/Y/Z | m/nóim | 12/12/12 | 12/12/12 | 12/12/12 | 10/10/10 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 20/20/15 | 20/20/15 | 15/20/15 | 15/15/15 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid |
|
|
|
|
|
| Modh tiomána |
| Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóiminte an fhearsaid (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Iris uirlisí (roghnach) |
|
|
|
|
|
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Trastomhas uasta an uirlis | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Fad uasta an uirlis | mm | 350 | 350 | 350 | 350 |
| Uasmheáchan uirlis | kg | 20 | 20 | 20 | 20 |
| Cruinneas |
|
|
|
|
|
| Cruinneas suímh X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Daoine eile |
|
|
|
|
|
| Meáchan meaisín | t | 57 | 63 | 75 | 70 |
| Toisí meaisín (F × L × A) | cm | 910×670×650 | 1110×670×650 | 1510×670×650 | 1110×720×650 |
| Mír | Aonad | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Raon próiseála |
|
|
|
|
|
| Taisteal ais X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| Raon rothlaithe ais A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Leithead éifeachtach gantry | mm | 3300 | 3300 | 3800 | 3800 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Tábla oibre |
|
|
|
|
|
| Toisí an tábla oibre | mm | 2500×6000 | 2500×8000 | 3000×6000 | 3000×8000 |
| Cumas ualaigh oibre | t | 30 | 35 | 35 | 40 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána |
|
|
|
|
|
| Uasluas beathaithe X/Y/Z | m/nóim | 8/10/10 | 8/10/10 | 8/10/10 | 8/10/10 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 12/15/15 | 10/15/15 | 12/15/15 | 10/15/15 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid |
|
|
|
|
|
| Modh tiomána |
| Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóimint an fhearsaid (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Iris uirlisí (roghnach) |
|
|
|
|
|
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Trastomhas uasta an uirlis | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Fad uasta an uirlis | mm | 350 | 350 | 350 | 350 |
| Uasmheáchan uirlis | kg | 20 | 20 | 20 | 20 |
| Cruinneas |
|
|
|
|
|
| Cruinneas suímh X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Daoine eile |
|
|
|
|
|
| Meáchan meaisín | t | 84 | 100 | 94 | 115 |
| Toisí meaisín (F × L × A) | cm | 1550×720×650 | 2050×720×650 | 1550×800×650 | 2050×800×650 |
Is ionad meaisínithe droichid cúig-ais bhíoma seasta féinfhorbartha é an tsraith táirgí seo le struchtúr dlúth, feidhmíocht den scoth, ardluais, cruinneas ard, déine ard, etc. Tá sé oiriúnach do chodanna meaisínithe i réimse tionscal ar nós aeraspáis, innealra innealtóireachta, iompar iarnróid, múnlaí beachtais, cumhacht gaoithe, etc.
Sraith PM-U
Glacann sé ceann luasctha dúbailte aerchóirithe ardluais agus ardchruinnis agus tá fearsaid leictreach ardchumhachta agus ard-chasmhóiminte feistithe ann, a bhfuil cumas gearrtha láidir aige.
Ceann luascáin dúbailte aerchóirithe
Glacann sé cinn luasctha dúbailte ardchruinneas, ard-dinimiciúla allmhairithe agus tá fearsaid leictreach ardluais, ard-chasmhóiminte feistithe air, a chomhlíonann na ceanglais arda maidir le cruinneas comhpháirte, cáilíocht dromchla agus éifeachtúlacht próiseála.
Dearadh optamaithe struchtúr ard-righneas
Úsáidtear modhanna deartha eilimintí críochta chun anailísí statach agus modúlach a dhéanamh ar chodanna éagsúla den mheaisín chun struchtúr an táirge a bharrfheabhsú tuilleadh agus dearadh struchtúrach ard-docht agus éadrom a bhaint amach.
Struchtúr tacaíochta cúnta scriú
Tá tacaíocht snámhach feistithe ar an scriú luaidhe taistil fhada, rud a fhéadann luas teorann an scriú luaidhe agus cobhsaíocht rothlaithe ardluais a fheabhsú go héifeachtach.
Iris uirlisí
Tá cineálacha éagsúla irisí uirlisí, 24/32/40/60, ar fáil chun uaireanta meaisínithe cúnta a ghiorrú go héifeachtach.
Tacaíocht ard-righneas
Tá trí threoir mhóra feistithe ar leaba an mheaisín, a sholáthraíonn dolúbthacht tacaíochta leordhóthanach agus coinneáil cruinnis.
Dearadh sábháilteachta daonnaithe
Cuireann dearadh laibirt miotail leatháin ag bun an bhoird oibre cosc ar sceallóga iarainn dul isteach i leaba an mheaisín. Cuireann an umar bainte sceallóga comhtháite deireadh go bunúsach le fadhb sceitheadh uisce.
| Mír | Aonad | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Raon próiseála | |||||
| Taisteal ais X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| Raon rothlaithe ais A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Leithead éifeachtach gantry | mm | 2800 | 2800 | 2800 | 3300 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Tábla oibre | |||||
| Toisí an tábla oibre | mm | 2000×3000 | 2000×4000 | 2000×6000 | 2500×4000 |
| Cumas ualaigh oibre | t | 16 | 20 | 26 | 22 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána | |||||
| Uasluas beathaithe X/Y/Z | m/nóim | 12/12/12 | 12/12/12 | 12/12/12 | 10/10/10 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 20/20/15 | 20/20/15 | 15/20/15 | 15/15/15 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid | |||||
| Modh tiomána | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóiminte an fhearsaid (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Iris uirlisí (roghnach) | |||||
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Trastomhas uasta an uirlis | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Fad uasta an uirlis | mm | 350 | 350 | 350 | 350 |
| Uasmheáchan uirlis | kg | 20 | 20 | 20 | 20 |
| Cruinneas | |||||
| Cruinneas suímh X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Daoine eile | |||||
| Meáchan meaisín | t | 57 | 63 | 75 | 70 |
| Toisí meaisín (F × L × A) | cm | 910×670×650 | 1110×670×650 | 1510×670×650 | 1110×720×650 |
| Mír | Aonad | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Raon próiseála | |||||
| Taisteal ais X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| Raon rothlaithe ais A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Leithead éifeachtach gantry | mm | 3300 | 3300 | 3800 | 3800 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Tábla oibre | |||||
| Toisí an tábla oibre | mm | 2500×6000 | 2500×8000 | 3000×6000 | 3000×8000 |
| Cumas ualaigh oibre | t | 30 | 35 | 35 | 40 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána | |||||
| Uasluas beathaithe X/Y/Z | m/nóim | 8/10/10 | 8/10/10 | 8/10/10 | 8/10/10 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 12/15/15 | 10/15/15 | 12/15/15 | 10/15/15 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid | |||||
| Modh tiomána | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóimint an fhearsaid (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Iris uirlisí (roghnach) | |||||
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Trastomhas uasta an uirlis | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Fad uasta an uirlis | mm | 350 | 350 | 350 | 350 |
| Uasmheáchan uirlis | kg | 20 | 20 | 20 | 20 |
| Cruinneas | |||||
| Cruinneas suímh X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Daoine eile | |||||
| Meáchan meaisín | t | 84 | 100 | 94 | 115 |
| Toisí meaisín (F × L × A) | cm | 1550×720×650 | 2050×720×650 | 1550×800×650 | 2050×800×650 |
Catagóirí táirgí
-
Ionad Meaisínithe CNC Ard-Docht Sraith VC le...
-
Treoir Líneach Colún Bogtha Cothrománach Sraith HP...
-
Treoir Líneach Colún Bogtha Cothrománach Sraith HT...
-
Meaisínithe CNC Tromshaothair Ceithre Rian Sraith VS...
-
Ionad Meaisínithe CNC Sraith V le Ard-Docht
-
Ionad Meaisínithe CNC Dúbailte Colún Sraith X
-
Ionad Meaisínithe CNC Cothrománach 5-Ais TKG1600
-
Lárionad Ilchodach Casadh agus Muilleoireachta Ingearach CNC...
-
Ionad Meaisínithe CNC Ardluais Sraith GM
-
Sraith GT Muilleoireachta CNC Ardluais
-
Deil CNC Dé-Fhearsaid SK32
-
Ionad Meaisínithe Ingearach CNC RFTV510 Do Roth...