Ionad Meaisínithe Gantry Cúig-Ais Sraith PM-GUN
Gnéithe
Is ionad meaisínithe droichid cúig-ais ard-docht féinfhorbartha é an tsraith táirgí seo. Glacann sé struchtúr bhíoma siméadrach bosca-i-bhosca chun freastal ar riachtanais phróiseála cóimhiotail tíotáiniam ard-chasmhóiminte, ard-docht, agus ardéifeachtúlachta, cóimhiotail ardteochta agus páirteanna eile.
Sraith PM-GUN
Tá ceann dúbailte luascáin aerchóirithe ardchumhachta agus ard-chasmhóiminte feistithe ar an struchtúr tras-bhíoma bosca-i-bhosca ard-docht, a bhfuil cumas gearrtha láidir agus cobhsaíocht chruinneas aige.
Crosbhíoma
Glacann ionad meaisínithe cineál gantry CNC dearadh struchtúr trasbhíoma siméadrach bosca-i-bhosca, cumraíocht ceithre rian fairsing, agus cuirtear an bloc sleamhnáin i lár an trasbhíoma, ionas go mbeidh strus cothrom ar an meaisín iomlán, rud a fheabhsaíonn saol an mheaisín go mór.treoiragus coinneáil cruinnis.
Ceann luascáin dúbailte aerchóirithe
Is féidir le ceann luasctha dúbailte ardchruinneas, ard-dinimiciúil allmhairithe, atá feistithe le fearsaid leictreach ardluais agus ard-chasmhóiminte, freastal ar riachtanais phróiseála ardéifeachtúlachta agus gearradh láidir páirteanna.
Tiomáint dé-mhótair
An fad-taistealGlacann an tiomáint struchtúr frith-aisiompaithe dé-mhótair raca giaranna, a bhfuil tréithe déine tarchuir láidir, cruinneas ard agus cothabháil éasca aige.
Iris uirlisí
Tá cineálacha éagsúla irisí uirlisí, 24/32/40/60, ar fáil chun uaireanta meaisínithe cúnta a ghiorrú go héifeachtach.
Braiteadh suímh lúb dúnta go hiomlán
Glacann braiteadh suímh aiseanna X, Y, agus Z an ionaid meaisínithe cnc gantry 5-ais cruinneas allmhairithescála optúils, agus glacann na haiseanna A agus C ionchódóirí uillinne ardchruinneas chun aiseolas iomlán lúb dúnta a bhaint amach chun rialú iomlán lúb dúnta a bhaint amach ar anmeaisín, rud a chinntíonn cruinneas shuíomh an mheaisín.
Sonraíochtaí Teicniúla
| Mír | Aonad | RFPM2040GUN | RFPM2060GUN | RFPM2540GUN | RFPM2560GUN |
| Raon próiseála |
|
|
|
|
|
| Taisteal ais X/Y/Z | mm | 4000/2200/1000 | 6000/2200/1000 | 4000/2700/1000 | 6000/2700/1000 |
| Raon rothlaithe ais A/C | ° | ±110/±360 | ±110/±360 | ±110/±360 | ±110/±360 |
| Leithead éifeachtach gantry | mm | 3200 | 3200 | 3700 | 3700 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Tábla oibre |
|
|
|
|
|
| Toisí an tábla oibre | mm | 2000×4000 | 2000×6000 | 2500×4000 | 2500×6000 |
| Cumas ualaigh oibre | t/m² | 5 | 5 | 5 | 5 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána |
|
|
|
|
|
| Uasluas beathaithe X/Y/Z | m/nóim | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 20/20/20 | 20/20/20 | 20/20/20 | 20/20/20 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid |
|
|
|
|
|
| Modh tiomána |
| Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóimint an fhearsaid (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Iris uirlisí (roghnach) |
|
|
|
|
|
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Trastomhas uasta an uirlis | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Fad uasta an uirlis | mm | 300 | 300 | 300 | 300 |
| Uasmheáchan uirlis | kg | 15 | 15 | 15 | 15 |
| Cruinneas |
|
|
|
|
|
| Cruinneas suímh X/Y/Z | mm | 0.020/0.012/0.014 | 0.028/0.012/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.012/0.010/0.010 | 0.018/0.010/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 |
| Daoine eile |
|
|
|
|
|
| Meáchan meaisín | t | 67 | 75 | 70 | 80 |
| Toisí meaisín (F × L × A) | cm | 900×670×600 | 1100×670×600 | 900×720×600 | 1100×720×600 |
| Mír | Aonad | RFPM3040GUN | RFPM3060GUN | RFPM3560GUN | RFPM3580GUN |
| Raon próiseála |
|
|
|
|
|
| Taisteal ais X/Y/Z | mm | 4000/3200/1000 | 6000/3200/1000 | 6000/3700/1000 | 8000/3700/1000 |
| Raon rothlaithe ais A/C | ° | ±110/±360 | ±110/±360 | ±105/±360 | ±105/±360 |
| Leithead éifeachtach gantry | mm | 4200 | 4200 | 4700 | 4700 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Tábla oibre |
|
|
|
|
|
| Toisí an tábla oibre | mm | 3000×4000 | 3000×6000 | 3500×6000 | 3500×8000 |
| Cumas ualaigh oibre | t/m² | 5 | 5 | 5 | 5 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána |
|
|
|
|
|
| Uasluas beathaithe X/Y/Z | m/nóim | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 20/20/20 | 20/20/20 | 20/20/20 | 20/20/20 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid |
|
|
|
|
|
| Modh tiomána |
| Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóimint an fhearsaid (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Iris uirlisí (roghnach) |
|
|
|
|
|
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Trastomhas uasta an uirlis | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Fad uasta an uirlis | mm | 300 | 300 | 300 | 300 |
| Uasmheáchan uirlis | kg | 15 | 15 | 15 | 15 |
| Cruinneas |
|
|
|
|
|
| Cruinneas suímh X/Y/Z | mm | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.020/0.016/0.010 | 0.020/0.016/0.010 |
| Daoine eile |
|
|
|
|
|
| Meáchan meaisín | t | 75 | 85 | 90 | 105 |
| Toisí meaisín (F × L × A) | cm | 900×770×600 | 1100×770×600 | 1100×820×600 | 1300×820×600 |
Is ionad meaisínithe droichid cúig-ais ard-docht féinfhorbartha é an tsraith táirgí seo. Glacann sé struchtúr bhíoma siméadrach bosca-i-bhosca chun freastal ar riachtanais phróiseála cóimhiotail tíotáiniam ard-chasmhóiminte, ard-docht, agus ardéifeachtúlachta, cóimhiotail ardteochta agus páirteanna eile.
Sraith PM-GUN
Tá ceann dúbailte luascáin aerchóirithe ardchumhachta agus ard-chasmhóiminte feistithe ar an struchtúr tras-bhíoma bosca-i-bhosca ard-docht, a bhfuil cumas gearrtha láidir agus cobhsaíocht chruinneas aige.
Crosbhíoma
Glacann sé dearadh struchtúir tras-bhíoma siméadrach bosca-i-bhosca, cumraíocht ceithre rian fairsing, agus cuirtear an bloc sleamhnáin i lár an tras-bhíoma, ionas go mbeidh strus cothrom ar an meaisín iomlán, rud a fheabhsaíonn saol an treorach agus coinneáil cruinnis go mór.
Ceann luascáin dúbailte aerchóirithe
Is féidir le ceann luasctha dúbailte ardchruinneas, ard-dinimiciúil allmhairithe, atá feistithe le fearsaid leictreach ardluais agus ard-chasmhóiminte, freastal ar riachtanais phróiseála ardéifeachtúlachta agus gearradh láidir páirteanna.
Tiomáint dé-mhótair
Glacann an tiomántán taistil fhada struchtúr frith-aisiompaithe dé-mhótair raca giaranna, a bhfuil tréithe déine tarchuir láidir, cruinneas ard agus cothabháil éasca aige.
Iris uirlisí
Tá cineálacha éagsúla irisí uirlisí, 24/32/40/60, ar fáil chun uaireanta meaisínithe cúnta a ghiorrú go héifeachtach.
Braiteadh suímh lúb dúnta go hiomlán
Glacann braiteadh suímh aiseanna X, Y, agus Z an uirlis mheaisín scálaí optúla cruinne allmhairithe, agus glacann aiseanna A agus C ionchódóirí uillinne ardchruinneas chun aiseolas suímh lúb dúnta iomlán a bhaint amach chun rialú iomlán lúb dúnta ar an meaisín a bhaint amach, rud a chinntíonn cruinneas suímh an mheaisín.
| Mír | Aonad | RFPM2040GUN | RFPM2060GUN | RFPM2540GUN | RFPM2560GUN |
| Raon próiseála | |||||
| Taisteal ais X/Y/Z | mm | 4000/2200/1000 | 6000/2200/1000 | 4000/2700/1000 | 6000/2700/1000 |
| Raon rothlaithe ais A/C | ° | ±110/±360 | ±110/±360 | ±110/±360 | ±110/±360 |
| Leithead éifeachtach gantry | mm | 3200 | 3200 | 3700 | 3700 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Tábla oibre | |||||
| Toisí an tábla oibre | mm | 2000×4000 | 2000×6000 | 2500×4000 | 2500×6000 |
| Cumas ualaigh oibre | t/m² | 5 | 5 | 5 | 5 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána | |||||
| Uasluas beathaithe X/Y/Z | m/nóim | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 20/20/20 | 20/20/20 | 20/20/20 | 20/20/20 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid | |||||
| Modh tiomána | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóimint an fhearsaid (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Iris uirlisí (roghnach) | |||||
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Trastomhas uasta an uirlis | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Fad uasta an uirlis | mm | 300 | 300 | 300 | 300 |
| Uasmheáchan uirlis | kg | 15 | 15 | 15 | 15 |
| Cruinneas | |||||
| Cruinneas suímh X/Y/Z | mm | 0.020/0.012/0.014 | 0.028/0.012/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.012/0.010/0.010 | 0.018/0.010/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 |
| Daoine eile | |||||
| Meáchan meaisín | t | 67 | 75 | 70 | 80 |
| Toisí meaisín (F × L × A) | cm | 900×670×600 | 1100×670×600 | 900×720×600 | 1100×720×600 |
| Mír | Aonad | RFPM3040GUN | RFPM3060GUN | RFPM3560GUN | RFPM3580GUN |
| Raon próiseála | |||||
| Taisteal ais X/Y/Z | mm | 4000/3200/1000 | 6000/3200/1000 | 6000/3700/1000 | 8000/3700/1000 |
| Raon rothlaithe ais A/C | ° | ±110/±360 | ±110/±360 | ±105/±360 | ±105/±360 |
| Leithead éifeachtach gantry | mm | 4200 | 4200 | 4700 | 4700 |
| Fad ó shrón an fhearsaid go dtí an tábla oibre | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Tábla oibre | |||||
| Toisí an tábla oibre | mm | 3000×4000 | 3000×6000 | 3500×6000 | 3500×8000 |
| Cumas ualaigh oibre | t/m² | 5 | 5 | 5 | 5 |
| Sonraíochtaí sliotán-T | mm | 28 | 28 | 28 | 28 |
| Beatha tiomána | |||||
| Uasluas beathaithe X/Y/Z | m/nóim | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 |
| Uasluas beathaithe A/C | rpm | 60 | 60 | 60 | 60 |
| Luas mear X/Y/Z | m/nóim | 20/20/20 | 20/20/20 | 20/20/20 | 20/20/20 |
| A/C luas tapa | rpm | 100 | 100 | 100 | 100 |
| Fearsaid | |||||
| Modh tiomána | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | Fearsaid leictreach | |
| Luas uasta an fhearsaid | rpm | 7000 | 7000 | 7000 | 7000 |
| Cumhacht an fhearsaid (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Chasmhóimint an fhearsaid (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Taper fearsaid | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Iris uirlisí (roghnach) | |||||
| Cumas iris uirlisí | T | 24 | 24 | 24 | 24 |
| Cineál sealbhóir uirlis | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Trastomhas uasta an uirlis | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Fad uasta an uirlis | mm | 300 | 300 | 300 | 300 |
| Uasmheáchan uirlis | kg | 15 | 15 | 15 | 15 |
| Cruinneas | |||||
| Cruinneas suímh X/Y/Z | mm | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| In-athdhéantacht X/Y/Z | mm | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.020/0.016/0.010 | 0.020/0.016/0.010 |
| Daoine eile | |||||
| Meáchan meaisín | t | 75 | 85 | 90 | 105 |
| Toisí meaisín (F × L × A) | cm | 900×770×600 | 1100×770×600 | 1100×820×600 | 1300×820×600 |
Catagóirí táirgí
-
Ionad Meaisínithe CNC Ard-Docht Sraith VC le...
-
Treoir Líneach Colún Bogtha Cothrománach Sraith HP...
-
Treoir Líneach Colún Bogtha Cothrománach Sraith HT...
-
Meaisínithe CNC Tromshaothair Ceithre Rian Sraith VS...
-
Ionad Meaisínithe CNC Sraith V le Ard-Docht
-
Ionad Meaisínithe CNC Dúbailte Colún Sraith X
-
Ionad Meaisínithe CNC Cothrománach 5-Ais TKG1600
-
Lárionad Ilchodach Casadh agus Muilleoireachta Ingearach CNC...
-
Ionad Meaisínithe CNC Ardluais Sraith GM
-
Sraith GT Muilleoireachta CNC Ardluais
-
Deil CNC Dé-Fhearsaid SK32
-
Ionad Meaisínithe Ingearach CNC RFTV510 Do Roth...